Family of input and output modules that can be used in a RTU model RTU587 or as OEM modules for telecontrol and automation applications.
The family includes digital and analogical input and outputs modules.
They are designed to be used in sub stations of electrical networks.

CHARACTERISTICS

• OEM Modules input/output modules for use in automation and telecontrol of electrical networks.
• Suitable to be used in electrical networks, in stations, sub stations or power plants.
• Can be mounted in normal racks.
• Presentation includes two parts of easy connection and disconnection; the base, passive with that allows the mechanical assembling and exterior connections and the active part that connects on the base that contains the whole active circuit.
• Digital input card TED32B, sincronizable for GPS.
• Modbus protocol
• Digital outputs card TSR8 and TSR16 support a command sequence with two stages, preselection and action.

Digital input card, TED32B

• Function: Acquire signals coming from an electrical system, to preprocess and transmit them to the CPU of the RTU.
• Inputs:
  32, passive digital, isolated
  Voltage: 48, 110, 125 or 220 Vdc
  
• Communications:
  Serial port RS485
  Time synchronization from CPU or GPS
• With the CNVIRIG422 accessory, it can synchronize time with 1 ms of resolution directly from a signal of GPS type IRIG-B.
• Power supply: 19 to 28 Vdc
  Input current: 100 mA

Protocol converter , IF-IRIG

• Function: Protocol conversion between an IRIG-B data source and the IRIG synchronisation module of the RTUQM system..
• Inputs and outputs:
  IRIG-B side, terminals: IRIG+ and IRIG-
  RS232 side, terminals: TX, 1PPS, GND
• Power supply
  Voltage: 24 Vdc ± 20 %
  Power consumption: 75 mA @ 24 Vdc
  Terminals: 0 V, 24 V

32 digital input card isolated with communication Modbus, TED32M

• Function: Acquire digital signals, to preprocess and transmit them to the master Modbus.
• Inputs:
  32, passive digital, isolated
  Voltage: 48, 110, 125 or 220 Vdc
  
• Communications:
  Serial port RS485
  
• Modbus protocol slave RTU.
• Power supply: 19 to 28 Vdc
  Input current: 100 mA

Digital output card, TSR8

• Function: Convert the digital signals coming from the CPU into amplified and isolated digital signals.
• Outputs: 8, by relay
  Contacts rated: 5 A @ 125 Vdc
• Communications:
  Serial port RS485
  
• Power supply: 19 to 28 Vdc
  Static input current: 100 mA

Digital output card, TSR16

• Function: Convert the digital signals coming from the CPU into amplified and isolated digital signals.
• Outputs: 16, by relay
  Contacts rated: 5 A @ 125 Vdc
• Communications:
  Port RS485
  
• Power supply: 19 to 28 Vdc
  Static input current: 100 mA

Isolated analog input card, TEA8A

• Function: Converting the 8 analog inputs to digital values and sending them through the serial port.
• Inputs: 8 type 4 - 20 mA
  Resolution 11 bits plus sign
• Communications:
  serial port RS485
  
• Power supply: 19 a 28 Vdc
  Power consumption: 100 mA

Analog output card , TSA4

• Function: Convert digital values recibed from CPU into analog current values.
• Outputs: 4 type loop current control, 4 - 20 mA
  Resolution 16 bits
• Communications:
  Serial port RS485
  Protocol BUS485
• Power supply: 9 to 28 Vdc
  Consumption: 200 mA

Analog input card for PT100, TPT8

• Function: Converting the 8 PT100 temperature signals to digital values and sending these values through the serial port.
• Inputs: 8 type Pt100
  Resolution: 0.1ºC
• Communications:
  Serial port RS485
  
• Power supply: 18 to 30 Vdc
  Power consumption: 125 mA @ 24 Vdc